Article search

All Articles

Total Articles : 35

Ahead of Print  Open Access Original Research Published on :- 04-May-2024

Rheological behaviour analysis of prepared nano-cutting fluids from Al2O3 and TiO2

By  
Anurag Sharma, R. C. Singh, Ranganath M. Singari, S. L. Bhandarkar,
AbstractIn this research paper, an attempt has been made to characterize and analyse the rheological properties of two samples of nano-cutting fluids. . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 04-May-2024

Application of Artificial intelligence in Single Point Incremental Forming for Surface Roughness Prediction

By  
Ranjeet Prasad, Manish Oraon, ,
AbstractThe sheet metal forming industries always try to find an emerging trend to form sheet-metal in a cost-effective manner. In this regard, a forming . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 04-May-2024

Investigation of microstructure and mechanical properties of multi-pass friction stir processing on precipitation hardened aluminum alloy

By  
Vipin Sharma, Yogesh Dewang, Mohit Sharma, Yashpal Gupta,
AbstractIn the present study, multi-pass friction stir processing of aluminum AA2014-T651 alloy is per-formed with one and four passes. The multi-pass . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Review Article Published on :- 04-May-2024

Service Life Enhancement: Exploring the Effects of Supplementary Cementitious Materials on RC Structures in Marine and Urban Contexts

By  
Dharma Raj Upadhyaya, Dr. B. Kameswara Rao, P. Sree Pavan,
AbstractReinforced concrete (RC) structures stand as the cornerstone of modern construction due to their cost-effectiveness and widespread availability. The . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 04-May-2024

Analysis of Sound Transmission Loss in Hybrid Mufflers for Automotive Applications

By  
Ravi Jatola, Amit Kumar Guptab,
AbstractAn exhaust system’s noise level can be reduced with the use of a muffler. There is general recognition that baffled exhaust mufflers reduce noise . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 30-Apr-2024

Experimental Analysis Of Thermal Behaviour Of Phase Change Materials In Cooling Applications Of Roof Top Building Slabs

By  
K. Pavan Kumar Reddy, B. Nageswara Rao, J. Pavanu Sai,
AbstractIn this research article, different phase change materials are incorporated inside the slabs to reduce the heat transfer from the roof. Experiments . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 24-Apr-2024

Axial Compression Behavior of Aluminum (Al), Glass/Epoxy (GFRP) and Hybrid Al-GFRP Crash-box: An Experimental and Digital Image Correlation Approach

By  
Varsha M.P., Mahesh, Prashant Rawat,
AbstractThe study aims to understand the axial compression characteristics and fracture of cylindrical Aluminum (Al), Glass/epoxy (GFRP) composite and Hybrid . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 24-Apr-2024

Experimental Investigation of Hardness of FSW Al 5083 Alloy for Naval and Marine Application

By  
Devarshi Kapil, Saurabh Pachauri, Manish Dixit, Ashish Swarnkar,
AbstractFriction stir welding (FSW) is a relatively novel method of solid-state joining. This connecting method is adaptable, environmentally benign, and . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 24-Apr-2024

Evaluation of microstructure properties and characterization of fracture locus of AA5083 through equal channel angular pressing techniques

By  
Nagendra Singh, Manoj Kumar Agrawal,
AbstractIn this investigation, a commercially available aluminium alloy called AA5083 was subjected to two passes of equal channel angular pressing utilising . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 24-Apr-2024

Deformation Behaviour of the Billet and Tooling Design on AA5083 through Equal Channel Angular Pressing With Effect of Back Pressure

By  
Nagendra Singh, Manoj Kumar Agrawal,
AbstractEqual channel angular pressing is an emerging method applied to subject materials to significant plastic strains while maintaining the original shape . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 24-Apr-2024

Exploring Polymer Substrates for CBSIW Antennas: Paper and Denim for Enhanced Gain and Bandwidth

By  
M. Ravi Kishore, Dr.K.C.B.Rao,
AbstractThis paper presents a novel approach to antenna design by leveraging the unique properties of paper and Denim materials, both of which are polymers. . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Review Article Published on :- 22-Apr-2024

A Review of Recent Advancements in the Field of Friction Stir Welding of Dissimilar Joints Made of Aluminium and Magnesium

By  
P J Lokesh Kumar, S Shankaranarayanan, C Jayabalan, S D Sekar, K Sengottaiyan, R Suresh Kumar,
AbstractFriction stir welding (FSW) stands at the forefront of welding technology, offering a promising avenue for joining dissimilar metals like aluminum and . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 22-Apr-2024

Impact of Tool rotating speeds on the Mechanical characteristics of dissimilar friction stir-welded AZ80A-Mg – AA6061-Al joints

By  
P J Lokesh Kumar, P Sevvel, S Shankaranarayanan, C Jayabalan, S D Sekar, K Sengottaiyan,
AbstractIn this investigation, separate AA6061-Al and AZ80A-Mg alloy plates were effectively joined through stir welding with friction. We looked closely at . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Review Article Published on :- 22-Apr-2024

Advancements in graphene reinforced metal matrix composites: A comprehensive review

By  
Tarun Kumar Kotteda, Manoj Kumar, Pramod Kumar, Ajay Gupta, Kalidindi Sita Rama Raju,
AbstractThe Present pollution norms insist automobile manufacturers to make use of ultra-high specific strength materials i.e., materials ahead of . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 19-Apr-2024

EXPERIMENTAL STUDY ON REPLACEMENT OF CEMENT AND FINE AGGREGATE WITH MARBLE DUST AND COPPER SLAG

By  
Ch. Vasavya, Ch. Mallika Chowdary,
AbstractWith the ever-growing challenge of managing escalating waste materials globally, this paper explores sustainable solutions in construction through the . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 22-Apr-2024

Service Life Prediction of Concretes Incorporated with Ground Granulated Blast Furnace Slag and Icrete with respect to Chloride Ion Penetration

By  
Dharma Raj Upadhyaya, Dr. B. Kameswara Rao, P. Sree Pavan,
AbstractThe reduced service life of concrete structures in coastal or de-icing salt conditions is commonly attributed to corrosion generated by chloride. . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 22-Apr-2024

Comparative Analysis of Dip and Spray Techniques with Ethanol, Polyvinyl Alcohol, and Acetone Hydrophobic Glass Slides with Al2O3 Coating

By  
Gaurav Verma, Kamal Sharma, Aayush Gupta,
AbstractThe hydrophobic effects of Al₂O₃ coatings on glass slides are investigated in this work by comparing dip and spray procedures using three distinct . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 22-Apr-2024

Service Life Prediction of Concretes Incorporated with Fly Ash and Alccofine with respect to Chloride Ion Penetration

By  
P. Sree Pavan, Dr. B. Kameswara Rao, Dharma Raj Upadhyaya,
AbstractChloride-induced corrosion poses a significant threat to the degradation of reinforced concrete structures, especially in extreme environments such as . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 19-Apr-2024

Experimental Study on Waste Fibers in Concrete

By  
Kalapala Vijay Babu, CH. Mallika Chowdary,
AbstractThe rising expense of building, along with the progressive impact on the environment, has driven experts to adopt natural fibers such as coir and . . .

[This section belongs to Journal of Polymer and Composites (jopc)]

Ahead of Print  Open Access Original Research Published on :- 18-Apr-2024

Using FEA Simulation and Photoelasticity Techniques to observe Integrated Stress Pattern for Transparent Polycarbonate Rectangular Specimen having Arc Feature

By  
Om Prakash Sondhiya, Roopesh Tiwari,
AbstractIn the fields of mechanics and materials science, photoelasticity is a reliable experimental method that provides a visual evaluation and analysis of . . .

[This section belongs to Journal of Polymer and Composites (jopc)]